Point-7 / Windsurfing extensions & mast base

RigConnections.

Extension to board. One complete connection.

Three extension systems and one mast base. Choose how you want to downhaul, match the correct mast diameter and length, then complete the connection to your board with Pro Base 2.0.

Point-7 ALU+ Double XXL Pulley extension with its downhaul rope and pulley system
The details make the difference. ALU+ Double XXL Pulley
Downhaul system shown.
4 Products
3 extensions + 1 mast base
RDM + SDM Extension options
Match your mast diameter
Italy Pro Base 2.0
Made in Italy

Choose your connection

Four products.
One complete rig.

Choose the extension around your downhaul method, mast diameter and required setting. Then complete the connection with the Pro Base 2.0. Explore each product for the full technical story.

Point-7 ALU+ Double Cleat extension

Aluminium / Guided cleat system

Alu+
Double Cleat.

The straightforward aluminium extension for riders who want guided rope control and compatibility with a suitable downhaul winch.

RDM 32 / 48 SDM 32 / 48

Point-7 ALU+ Double XXL Pulley extension

Aluminium / Easy manual downhaul

Alu+
Double XXL Pulley.

Two oversized pulleys and an open cleat create a freer rope path for riders who normally downhaul by hand.

RDM 32 / 48 SDM 32 / 48

Point-7 Carbon Pro mast extension

Carbon / Premium lightweight construction

Carbon
Pro.

Carbon tubing, oversized rollers and an open cleat for riders who want a lighter, high-performance rig connection.

RDM 28 / 44 SDM 32 / 48*

Point-7 Pro Base 2.0 mast base

Made in Italy / Mast base

Pro Base
2.0.

The final connection to the board. Stainless-steel monoblock pin, urethane tendon and four-line safety rope in a serviceable design.

Urethane tendon 4-line safety rope

Extension size labels are in centimetres. Select the diameter and length in the shop. Pro Base 2.0 completes the connection below the extension and has its own dedicated technical page.

See the full comparison

The differences that matter

Compare.
Choose. Rig.

Start with your preferred downhaul method. Then check mast diameter, required extension setting and budget.

Point-7 extension comparison. Pro Base 2.0 is the mast-base connection and is therefore not part of this extension-only table. On a small screen, swipe to see all three extension models.
What matters ALU+ Double Cleat ALU+ Double XXL Pulley Carbon Pro
Main priority Guided rigging and value Easier downhauling by hand Reducing rig weight
Tube material T8 aluminium T8 aluminium Carbon
Cleat / pulley layout Two guided cleats with brass rollers One open cleat with two inverted XXL pulleys One open cleat with oversized rollers
Downhaul winch Recommended layout. Check the fit of your winch. Not every winch type is compatible. Confirm compatibility with your particular tool.
RDM shop options 32 / 48 cm 32 / 48 cm 28 / 44 cm
SDM shop options 32 / 48 cm 32 / 48 cm 32 / 48*
Height adjustment 2 cm steps, starting at 2 cm 2 cm steps, starting at 2 cm 2 cm steps, starting at 2 cm
Included rope 3.8 mm Marlow Formuline 3.8 mm Marlow Formuline 3.8 mm Marlow Formuline
Price position Entry Mid-range Premium
Main trade-off XXL Pulley offers a freer manual pull. Extra cost over Double Cleat; check winch compatibility. Premium cost; less noticeable weight saving at the rig’s foot.
Choose your size Shop Double Cleat Shop XXL Pulley Shop Carbon Pro

* Carbon Pro SDM 48: this is the shop model name. Confirm its maximum extension setting with the Point-7 team before ordering.

Get the fit right

Three checks.
One correct setup.

The right construction is only part of the choice. Match the extension to the equipment you actually sail.

Match your mast.

Choose RDM for an RDM mast and SDM for an SDM mast. These are separate diameter options. Check your mast’s specification before selecting a variant.

Check the setting.

Use your sail’s recommended mast and extension setting. The required setting must sit within the extension’s marked range. Keep the required insertion inside the mast.

Match your method.

Double Cleat suits a compatible winch. XXL Pulley prioritises manual downhaul. Choose Carbon Pro when reducing weight matters. Then complete the rig with a compatible mast base such as Pro Base 2.0.

Straight from Point-7

See the system.
Thread it right.

Watch the rope routing for each extension. Follow the correct path, keep the lines clear and check the setup before applying tension.

Double Cleat / Rope routing Watch ↗
XXL Pulley / Rope routing Watch ↗
Carbon Pro / Rigging guide Watch ↗

Before you choose

Clear answers.
Better choices.

Choose around your rig and your routine. Need help? Send us your sail model, mast diameter and required extension setting.

Which extension should I choose for downhauling by hand?
ALU+ Double XXL Pulley is our recommended aluminium option for manual downhaul. Its two large pulleys and open cleat give the rope a freer path. Carbon Pro also uses oversized rollers and an open cleat, with carbon construction for riders who prioritise weight.
Is Carbon Pro worth the extra cost?
Choose it when reducing rig weight is a priority and the premium fits your budget. Weight saved at the foot of the rig is less noticeable than at the head or clew. If your main goal is easier manual downhaul, the aluminium XXL Pulley is a practical starting point.
Can I use my existing downhaul winch?
Check the fit of your exact winch before ordering. Double Cleat is our recommended system for compatible winch use. The XXL Pulley’s open-cleat design does not suit every winch. For Carbon Pro or an unfamiliar tool, ask the team to confirm the combination .

From mast to board

Complete the
connection.

Choose the extension that fits your mast and rigging routine, then complete the connection with the right mast base. We are here if you need help matching the full setup.