Point-7 / Aluminium mast extension

Alu+Double Cleat.

Guided. Simple. Ready to rig.

A heavy-duty T8 aluminium extension built around two guided cleats. Rig from either side, keep the rope controlled and choose this system when a compatible downhaul winch is part of your routine.

Point-7 ALU+ Double Cleat mast extension with guided cleats and original graphics
Double guided cleat. RDM & SDM
32 / 48 cm
T8Aluminium
tube
RDM / SDMTwo mast
diameters
2 cmAdjustment
steps
3.8 mmMarlow Formuline
rope included

Why Double Cleat

Built around
the way you rig.

The goal is not to complicate the extension. It is to control the rope, give you a secure locking point and make the system practical from either side of the sail.

Double cleat.

A symmetric guided-cleat layout lets you rig from port or starboard side and keeps the locking point easy to access.

Guided rope.

The rope is directed into the cleat instead of running across a complicated base layout. A practical choice when using a compatible winch.

Full range.

RDM and SDM versions in 32 and 48 cm cover the majority of Point-7 fin-sail rigging requirements, with adjustment every 2 cm.

Technical specifications

Choose the diameter.
Choose the range.

Start with the mast diameter required by your sail. Then choose the shortest extension that comfortably contains your required setting.

Current ALU+ Double Cleat configurations. Product availability and price are shown in the shop.
Model Mast diameter Adjustment range Adjustment Rollers Tube
32 SDMSDM2–32 cm2 cm steps3T8 aluminium
48 SDMSDM2–48 cm2 cm steps3T8 aluminium
32 RDMRDM2–32 cm2 cm steps2T8 aluminium
48 RDMRDM2–48 cm2 cm steps2T8 aluminium

Supplied with original Marlow 3.8 mm Formuline rope. Always match the extension to the exact RDM or SDM specification of your mast and keep the setting within the marked adjustment range.

Point-7 Double Cleat extension showing the symmetric base and adjustment system
ALU+ Double Cleat / Symmetric guided base system.

Heavy duty. Smart. Safe.

Simple parts.
Clear purpose.

The extension is built to be easy to understand, rinse and maintain. The T8 aluminium tube carries anodised graphics, while the base layout keeps the rope system exposed and accessible.

Stainless-steel base hardware

Marine-oriented metal components at the cleat/base assembly.

Symmetric rigging

Designed so the rope can be secured from either side of the sail.

X-Space openings

Wide openings help sand and water clear from the adjustment area.

Quick adjustment ring

Light, direct height adjustment in 2 cm increments.

1:1 rigging reference

Developed alongside Point-7 sails for fast setting using the printed extension reference.

Replaceable rope

Formuline rope is supplied and can be replaced without rebuilding the complete extension.

Double Cleat or XXL Pulley?

Choose around
how you downhaul.

The aluminium tubes serve the same job. The important difference is the rope and cleat system at the base.

Choose this page

Double Cleat.

Best starting point if you normally use a compatible downhaul winch or prefer a guided rope-locking system.

Alternative aluminium system

Double XXL Pulley.

Choose the oversized-pulley system if you normally downhaul by hand and want the rope to run through a freer, lower-friction path.

Rig it correctly

Thread the rope.
Lock it clean.

Follow the original Point-7 routing so the rope remains clean through the rollers and enters the cleat correctly. Check the line before applying full downhaul tension.

Double Cleat / Rope routing Open video ↗

Before you rig

Good setup.
Longer life.

A simple extension still deserves the correct diameter, clean adjustment system and regular inspection.

Should I choose 32 cm or 48 cm?
Use the shortest extension that comfortably covers the setting required by your sail. A longer model can work at a short setting, but it adds unnecessary tube length and weight.
Should I choose RDM or SDM?
Match the extension diameter to the mast specified for your sail. RDM and SDM are separate fittings, so choose the correct version before selecting the length.
Is Double Cleat better if I use a winch?
It is the Point-7 aluminium system we recommend as the starting point for compatible winch use because the guided cleat helps direct and secure the rope. Check the fit of your exact winch before ordering.
How should I care for the aluminium extension?
After salt-water sessions, rinse it with fresh water, remove it from the mast, clear sand from the adjustment holes and moving parts, and let it dry before storage.
Which mast base should I pair with it?
Use a compatible mast base and extension connection. The current Point-7 Pro Base 2.0 is the dedicated Point-7 board-to-rig connection.

Guided rigging. Straightforward choice.

Set it.
Lock it. Go.

Choose the correct RDM or SDM diameter and enough range for your sail, then check current availability in the shop.