Point-7 / Windsurfing mast base

Pro Base2.0

Your rig. Connected.

The connection between your sail and your board deserves the same attention as the rest of your rig. Made in Italy, Pro Base 2.0 brings together a stainless-steel monoblock pin, a urethane tendon and a four-line safety rope.

Complete Point-7 Pro Base 2.0 with stainless-steel pin, urethane tendon, safety rope and yellow plate
Made in Italy. Monoblock pin.
Urethane tendon.
Italy Production
Point-7 Pro Base 2.0
1 piece Stainless-steel
pin and upper cap
4-line Safety rope
Backup connection

Built around the connection

Small part.
Serious purpose.

From the top pin to the board contact, each component has a job. The details explain the design.

Original Point-7 stainless-steel monoblock pin and upper cap

Stainless-steel monoblock

One-piece connection.

The pin and upper cap form one piece. There is no separate screw joining the pin to its cap. The tendon and lower assembly use their own fasteners.

Point-7 urethane tendon and retaining ring

Urethane tendon

Built to articulate.

The flexible joint lets the rig move relative to the board. Smooth screw surfaces and rounded cap edges are designed to avoid sharp contact with the tendon.

Point-7 yellow mast-base disc with EVA grip visible underneath

Disc with EVA grip

The board connection.

The plate disc combines EVA grip with a safety pin. A reversible brass nut completes the mast-track attachment.

Exploded view of the Point-7 Pro Base showing the pin, screws, tendon, lower cap, plate, disc and brass nut
Pro Base 2.0
Exploded construction.
View full size ↗

Know what connects you

Built from
the details.

Steel, aluminium, urethane and a dedicated plate material. A construction you can understand, inspect and maintain.

Pro Base 2.0 / Materials and components.
Component Construction
Pin + upper cap One-piece stainless-steel monoblock
Flexible joint Urethane tendon
Safety connection Four-line safety rope
Lower cap Anodised aluminium with smooth edges
Fasteners A2 screw bases and stainless-steel hardware
Plate and disc SABIC ML 3400 material
Disc details EVA grip and safety pin
Mast-track nut Brass, usable on either side

The four-line rope is designed to help keep the rig and board connected if the tendon fails. Inspect it alongside the tendon before sailing.

Straight from Point-7

Know your
connection.

Take a closer look at Pro Base 2.0. See the components together and understand the connection at the foot of your rig.

The Pro Base 2.0. Open video ↗

Keep your equipment ready

Replace the tendon.

The Pro Base 2.0 tendon is available separately. Choose the dedicated spare for this model and ask our team if you need help identifying the correct part.

Before you rig

Check the fit.
Know your gear.

A good setup starts with compatible equipment and components in good condition.

Will Pro Base 2.0 fit my extension and board?
Check the connector on your extension and the mast-track fitting on your board before ordering. If you are unsure, send the team your extension model and a photo of the fittings so we can confirm the combination.
What should I check before a session?
Inspect the tendon, safety rope and fasteners. Check that the base is secured to the board and the extension connection is fully engaged. Replace damaged or worn parts before sailing, and rinse away salt and sand after use.
Which replacement tendon should I order?
Choose the Pro Base 2.0 spare tendon . For an older Point-7 base or another model, confirm the part with our team first. Follow the correct assembly instructions when replacing it.

The foundation of your next session

Lock in.
Get out there.

Complete your setup with Pro Base 2.0. Check current availability in the shop or speak directly with the Point-7 team about your equipment.