Point-7 / Carbon mast extension

CarbonPro.

Light. Direct. Precise.

A premium carbon extension for riders who want to reduce rig weight without giving up a simple, direct downhaul system. High-grade carbon tubing, oversized rollers and a symmetric open cleat keep the setup clean and the pull efficient.

Point-7 Carbon Pro mast extension with original graphics, rollers and downhaul rope
Carbon construction. Oversized rollers.
Open symmetric cleat.
CarbonHigh-grade tube
Low-weight focus
2 cmAdjustment steps
Starting at 2 cm
2Oversized rollers
Direct rope path
3.8 mmMarlow Formuline
Rope included

Why Carbon Pro

Less weight.
Same job.

The purpose is not simply to replace aluminium with carbon. The extension still needs the stiffness, adjustment range and pulley alignment to work correctly as part of the complete rig.

01

Carbon tube.

High-grade carbon construction reduces weight at the foot of the rig while maintaining the stiffness required to support the sail's designed luff curve.

02

Direct downhaul.

Oversized rollers and an open cleat keep the rope path logical and reduce unnecessary friction when applying downhaul tension.

03

Fast adjustment.

A simple adjustment ring and 2 cm increments make it quick to set the extension before rigging, with no complicated locking system.

Technical specifications

Four versions.
One system.

Choose the diameter and adjustment range required by your mast and sail. Current published specifications are shown below.

Point-7 Carbon Pro Extension / published technical specifications.
Model Material Weight Start Interval Max setting Rollers Both tacks
SDM 48Carbon565 g2 cm2 cm44 cm2Yes
RDM 48Carbon515 g2 cm2 cm44 cm2Yes
SDM 32Carbon508 g2 cm2 cm32 cm2Yes
RDM 28Carbon458 g2 cm2 cm28 cm2Yes

Important: the current published specification names the long SDM/RDM models as “48” while listing a 44 cm maximum setting. If your sail requires more than 44 cm, confirm the exact model and usable range before ordering.

Point-7 Carbon Pro mast extension product image
Carbon Pro / Clean rope path, quick adjustment and carbon tube.

Built around the rig

Simple by design.
Precise in use.

Every part has one job: support the mast, hold the setting and make the downhaul system easy to thread and use.

Carbon tubing

Low-weight construction with stiffness developed around the rig rather than weight alone.

Symmetric free cleat

Open cleat layout allows rigging from either side and works with the two-pulley system.

Quick adjustment ring

A light, fast system for changing extension length in 2 cm increments.

1:1 rig reference

Point-7 sail rigging references can be used with the extension scale for faster repeatable setup.

Replaceable rope

Delivered with Marlow Formuline rope and designed for straightforward rope replacement.

Stainless cleat assembly

The base hardware is built for the loads and repeated use of a high-tension downhaul system.

Which system fits you?

Carbon Pro
or aluminium?

All three systems do the same essential job. Choose according to weight, downhaul method, extension range and budget.

Choose this for lower rig weight

Carbon Pro.

Choose Carbon Pro when reducing weight and keeping a clean oversized-roller system are priorities. It is the premium option in the extension range.

Buy Carbon Pro

Choose aluminium for value or range

ALU+ systems.

Choose Double XXL Pulley for easy manual downhaul, or Double Cleat when a guided-cleat layout and compatible downhaul winch are your priorities.

Compare all extensions

Rig it correctly

Thread it.
Set it. Sail.

See the Carbon Pro system in use before applying full downhaul. Keep the rope path clean, check the extension setting and make sure the mast and base connections are fully engaged.

Carbon Pro / Rigging guide. Open video ↗

Before you choose

Clear answers.
Better setup.

Start from your mast diameter and the extension setting required by your sail. Carbon comes after compatibility.

Is Carbon Pro automatically better than aluminium?
Not for every rider. Carbon Pro is the premium choice when reducing rig weight matters. If your main priority is maximum adjustment range, price or a particular downhaul method, one of the aluminium systems may suit you better.
Should I choose RDM or SDM?
Match the extension diameter to the mast specified for your sail. RDM and SDM are separate systems. Do not choose diameter from sail size alone.
Can I use Carbon Pro with a downhaul winch?
The open-cleat layout is designed around a direct manual rope path. Winch compatibility depends on the exact tool. If you use a downhaul winch regularly, compare the Double Cleat system or ask the Point-7 team to confirm your combination.
Which mast base should I use?
Use a compatible mast base and make sure the extension connection is fully engaged before sailing. The current Point-7 option is Pro Base 2.0.
How should I care for the extension?
Rinse away salt and sand, inspect the rope, rollers, cleat and adjustment ring, and replace worn rope before it fails. Check the carbon tube for impact damage before high-load sessions.

Premium connection

Less weight.
More direct.

Choose the correct diameter and extension range, then complete the connection with the base that fits your setup.