High quality windsurfing masts are mainly manufactured in Italy. There are different companies producing this part of the equipment. Some companies even if Italian are based outside Italy. Our supplier is based in Italy and produces in Italy. Most of the masts might look the same, but often produced by different manufactures with different machinery, materials, and technology. By having the mast production based in Italy where Point-7 is situated, it’s possible to have a continuous development into new products and ensure that the quality of all finished products that leaves the factory is second to none. Further guaranteeing the quality of the materials being used in production are up to the specifications needed for making a durable performance product.
CHOOSE YOUR MAST
COMMITED TO FLY.
DOES A FOIL MAST ABSORB CHOP?
DOES THE PROFILE, OUTLINE, LEACH LINE OF A FOIL SAIL LOOK LIKE A NORMAL FIN SAIL?
DOES A FOIL SAIL HAVE THE SAME PRESSURE AS A FIN SAIL?
These are just 3 main questions that can be answered the same. NO.
Therefore in Point-7 we have decided to develop dedicated masts to enhance the performance of our foil sails, exclusively for those who don’t want compromises in performance.
F100 | 100% Carbon | 460 490 520 570
SDM-S: Standard Diameter-Sonic.
We added the ‘S’ for sonic to our SDM masts as on the top of the mast, there is a new construction which increases the reflex on the winglet area of the sail, giving more control and stability to the sail. The mast are available in the names of K100, K80 and K60, to cover 3 carbon % gradients. You will discover more about them in the dedicated sections. The K100 will be introducing the 520, 550 and 570 masts for formula foil racing
K100 | 100% Carbon | 430 460 490
K80 | 80% Carbon | 430 460 490
K60| 60% Carbon | 430 460
RDM-I: Reduce Diameter- Inverted.
Once you take out the mast from its mast bag, do not be thinking that something is wrong. The ferrule is part of the top, and not part of the bottom anymore. Therefore, the rdm is now being called RDM-I. After testing with our wave team, the masts, we have discovered that landing hard flat or nosedive jumps, was creating extra stress to the top, where the ferrule would enter it. By having the ferrule being part of the top, the stress is taken out and the tops do not suffer the extra stress that could bring in the worst case to breakages. We have decided to clean up our RDM-I range by offering 2 very distinctive models. The K87 and the K97. 87% carbon mast to bring a durable mast with the highest carbon % possible. A 100% carbon mast is the K97, but with extra reinforcements to give the extra durability to the normal 100%, making itself a 97% carbon mast. A new rubber cap at the joints, to clean up the inside part of the mast from dirt, while uniting the top to the base.
K97 | Carbon 97% | 300, 340, 370, 400, 430
K87 | Carbon 87% | 340, 370, 400, 430